Wide and stable four-track base provides the best support stability. All body castings adopt box-structured design. Three-axis drive adopts precision ball screws.The three-axis screws are pre-stretched in order to eliminate the deformation generated by heating and to ensure the repetition accuracy of the machine. High-precision screw modular assembly is adopted,with parallelism and perpendicularity controlled within±0.01 of the whole length. To protect the drives axial motor and screw,three sections of protection are conducted,i.e.the software limit,the hardware limit and Urethane. Four-track design is adopted for stable base and saddle base to protect the excellent stability. Direct drive is adopted for motors and ball screws. Chip removal screws are attached to both sides of the base.
機型
MV-L1600
MV-L1800
工作臺 Worktable
工作臺尺寸 Worktable size
1800*950mm
2000*950mm
Work Arer
1650*950mm
1850*950mm
T型槽 T-slots
CD160*5*22mm
CD160*5*22mm
zui大負荷 Maximun load
1800KG
2000KG
行程 Travel
三軸行程 Three-axis travel
1650*950*800mm
1850*950*800mm
主軸端面至工作臺面距離 Distance from spindle edge to table
150-950mm
150-950mm
主軸中心至滑道面距離 Distance from spindle center to colunm
1070mm
1070mm
主軸 Spindle
主軸錐孔 Spindle taper hole
BT-50
BT-50
主軸直徑 Spindle diameter
Φ190mm
Φ190mm
主軸轉數（標準配置） Spindle revolution Standard contiguration
會員1.png)
機床商務網